Rain Bird 150PEB/200PEB Globe Valves with Flow Control

Rain Bird 150PEB/200PEB Globe Valves with Flow Control

Brand: Rain Bird | SKUs: 200PEB, 150PEB

Product Overview

Choose a Rain Bird PEB globe valve for a commercial irrigation zone that needs manual flow adjustment and a serviceable glass-filled nylon body. The 150PEB has 1-1/2-inch NPT connections; the 200PEB has 2-inch NPT connections. Size the valve for the zone’s actual flow and allowable pressure loss. These standard PEB options do not include the PESB scrubber mechanism.

Key Features

• Glass-filled nylon body with reinforced rubber diaphragm.
• Normally closed, forward-flow globe design.
• Manual flow-control handle for adjusting outlet flow.
• Internal bleed for manual operation and external bleed for flushing.
• Molded-in stainless steel studs support repeated bonnet servicing.

Common Uses

• Commercial landscape irrigation zones using a standard globe valve.
• Replacing a matching 1-1/2-inch or 2-inch PEB valve.

Technical Specifications

• 150PEB: 1-1/2-inch female NPT inlet/outlet.
• 200PEB: 2-inch female NPT inlet/outlet.
• Operating pressure: 20–200 psi.
• Maximum water temperature: 150°F (66°C).
• Standard solenoid: 24 VAC, 50/60 Hz.
• Published 60 Hz electrical ratings: 0.41 A inrush; 0.14 A holding; coil resistance 30–39 ohms.
• Manufacturer pressure-loss examples with flow control fully open: 150PEB at 50 GPM = 3.6 psi; 200PEB at 50 GPM = 4.8 psi.
• Standard flow control is manual; PRS-D automatic pressure-regulating module is optional and ordered separately.
• Standard AC configuration is separate from battery-controller latching-solenoid configurations.

Dimensions

• 150PEB height × length × width: 8 × 6 × 6 inches.
• 200PEB height × length × width: 8 × 6 × 6 inches.

Compatibility & Installation Notes

Check NPT thread size, globe layout and the model-specific pressure-loss chart. The complete family’s flow envelope is not a recommended operating range for every size. Allow room above the valve for bonnet service; an optional PRS-D adds 2 inches to height.

Flush the mainline before installation and follow the flow arrow, with the solenoid on the downstream side. The manual specifies PTFE tape rather than pipe dope and no more than two turns beyond hand tight. Use watertight wiring connectors with a compatible controller.

For flows below 5 GPM or Xerigation applications, install upstream filtration as recommended. Follow the manufacturer’s low-flow flow-control settings. A scrubber and a manual flow-control stem do not substitute for downstream emitter filtration or an automatic pressure regulator.

The gallery includes a PESB cutaway and PEB/PESB family illustrations. The cutaway does not mean a scrubber is included with either PEB option. The PRS-D shown in the model-selection illustration is optional.

*One Solenoid Handle Per Order

Frequently Asked Questions

Which pipe sizes are offered?

150PEB has 1-1/2-inch female NPT connections; 200PEB has 2-inch female NPT connections.

Is automatic pressure regulation included?

No. The standard valve has manual flow control. A PRS-D pressure-regulating module is a separate optional accessory.

Does PEB have a scrubber?

No. The scrubber mechanism is a PESB feature. The PEB valves listed here are the standard globe-valve models.

Can I use the standard solenoid with a battery controller?

The standard solenoid requires 24 VAC, 50/60 Hz. Battery-controller use requires a compatible separately selected latching solenoid; Rain Bird limits that configuration to 150 psi.

Why Buy from Big Frog Supply?

Choose 150PEB or 200PEB by connection size and the loss your zone can tolerate: at 50 GPM the published losses are 3.6 and 4.8 psi respectively, so a larger connection alone does not guarantee lower loss. Both need an 8 × 6 × 6-inch body space and offer manual flow adjustment; select PESB separately when a scrubber is required.