King Innovation 72020 KSC-2 Small Shrink-Crimp Connectors – 20-Bag
Brand: King Innovation | SKU: 72020
Product Overview
The 72020 KSC-2 is a small in-line crimp connector with adhesive-lined heat shrink for compatible stranded copper landscape-lighting wire. Crimp the tubular copper connector on both sides with the matching King Krimper indent, then heat the sleeve until it seals. The bag contains 20 KSC-2 units for repeat low-voltage splices.
Key Features
- 20 KSC-2 small connector systems per bag
- Tin-plated tubular copper crimp and waterproof adhesive-lined sleeve
- For stranded conductors only, overall #18–#12 AWG range
- Works with King Krimper 46550 at the 5.5 mm indent; special single #18 case uses 2 mm
Common Uses
- Low-voltage landscape-lighting in-line splices
- Approved weather-exposed connections when the complete sleeve system is installed
Technical Specifications
- Maximum 125 V; stranded wire only
- KSC-2 overall #18–#12 AWG, subject to exact combinations
- Crimp dimensions 0.21 x 0.78 in.; sleeve 0.54 x 3.00 in.
Dimensions
Crimp: 0.21 x 0.78 in.; heat-shrink sleeve: 0.54 x 3.00 in.
Compatibility & Installation Notes
Turn off power. Slide the sleeve onto one wire first. Strip 3/8 in. normally; for one #18 or one #16 conductor per side, strip 3/4 in. and fold back as instructed. Make two crimps per side with the matching indent, center the sleeve, and heat evenly until clear adhesive appears. Do not reuse.
Frequently Asked Questions
Can KSC-2 be used with solid wire?
No. King Innovation specifies stranded wire only for this connector family.
Does this need a crimp tool?
Yes. King specifies its 46550 King Krimper with the matching KSC-2 indent.
Why Buy From Big Frog Supply
Big Frog Supply identifies the exact 72020 KSC crimp size and stranded-wire fit so you can compare it with your wiring plan before ordering.
Reviews
There are no reviews yet.