Bearing JD8130

One New Aftermarket Replacement Tapered Roller Bearing Cone Fits John Deere and Fits Caterpillar (Fits CAT) Equipment

This tapered roller bearing cone (taper cone) is a direct replacement Fits John Deere part number JD8130 and Fits Caterpillar (Fits CAT) part number 3L9410. The cone (inner ring assembly) is designed to handle combined radial and axial loads and is typically mounted in opposing pairs on a shaft. It is used across a wide range of Fits John Deere agricultural tractors, combines, construction equipment, and Fits Caterpillar dozers, motor graders, and wheel loaders.

Specifications

• Type: Tapered Roller Bearing Cone (Single Cone)
• Inside Bore: 2.625 in (66.68 mm)
• Cone Width: 1.188 in (30.16 mm)
• Inner Corner Radius: 0.14 in
• Cup Outer Diameter: 4.4375 in (112.71 mm)
• Mating Cup Part Number: 39520
• Series: 39500

Compatible Models

Fits John Deere Tractors: 4020, 7200R, 7210R, 7215R, 7230R, 7250R, 7260R, 7270R, 7280R, 7290R, 7310R, 8130, 8225R, 8230, 8235R, 8245R, 8260R, 8270R, 8285R, 8295R, 8295RT, 8310R, 8310RT, 8320R, 8320RT, 8330, 8335R, 8335RT, 8345R, 8345RT, 8360R, 8360RT, 8370R, 8370RT, 8400R, 8430, 8440, 8450, 8530, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, 9100, 9120, 9200, 9220, 9230, 9300, 9300T, 9320, 9320T, 9330, 9400, 9400T, 9410R, 9420, 9420T, 9430, 9460R, 9520, 9520T, 9570 STS (tractor), 9620, 9620T, 7R 210, 7R 230, 7R 250, 7R 270, 7R 290, 7R 310, 7R 330, 7R 350, 8R 230, 8R 250, 8R 280, 8R 310, 8R 340, 8R 370, 8R 410, 8RT 310, 8RT 340, 8RT 370, 8RX 310, 8RX 340, 8RX 370, 8R 2304, 8R 2704, 8R 3004

Fits John Deere Combines: S560, S680, S680H, S685, S685H, S690, S690H, S690 Precision Upgrades, S680 Precision Upgrades, S780, S780 Precision Upgrades, S785, S790, S790 Precision Upgrades, S7 800, S7 850, S7 900, 9560 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS, 9880 STS, F4365, F4365 / 800R Precision Upgrades, 800R, VFS70

Fits John Deere Construction – Dozers / Track-Type Tractors: 450G, 450H, 450J, 450K, 450P, 455G, 550, 550G, 550H, 550J, 550K, 550P, 605C, 605K, 650G, 650H, 650J, 650K, 650P, 655K, 655P, 750C, 750J, 750J-II, 750K, 750L, 750P, 755K, 755P, 850C, 850J, 850J-II, 850JR, 850K, 850L, 850L PL, 850P, 850X, 1050K, 1050K PL, 1050P

Fits John Deere Construction – Scrapers / Articulated Dump Trucks / Other: 2704, 2854, 2904, 3004, 3204, 4P, 5A, 16, 24H, 24M

Fits John Deere Forestry / Feller Bunchers: 527, 570, 570A, 570B, 931B, 931C, 935C II, 939

Fits John Deere Precision / Series: 7R Series Precision Upgrades

Fits Caterpillar (Fits CAT) Dozers / Track-Type Tractors: D3B, D3C, D3C II, D4B, D4C, D4C II, D4C III, D5, D5C, D5C III, D5C PAT, D5C PATLGP, D5H XL, D5M, D5R, D5R LGP, D5R XL, D5R2, D6N, D6N LGP, D6N XL, D6N 30/30

Fits Caterpillar (Fits CAT) Motor Graders: 966 XE, 966XE, 972 XE, 972M XE, 972XE

Fits Caterpillar (Fits CAT) Wheel Loaders: 834, 834G, 834H, 834K, 836, 836G, 836H, 836K, 988, 988G, 988H, 988K

Fits Caterpillar (Fits CAT) Other: D250E II, HF201, HF201B, HF221

Replaces Part Number(s):

JD8130, 39590, 3L9410, 3L-9410

Aftermarket Interchange Numbers

Timken 39590, NTN 39590, National 39590, Peer Bearing 39590, SET408 (cone 39590 / cup 39520)

New aftermarket replacement part – not remanufactured, not used.