Prier P-114X14-ORB 14-Inch CoolTemp Cold-Water Hydrant, Crimp PEX, Oil-Rubbed Bronze
Brand: Prier | SKU: P-114X14-ORB
Product Overview
Choose P-114X14-ORB for a cold-water outdoor connection with a 14-inch insertion, 1/2-inch crimp PEX inlet and oil-rubbed bronze finish. The CoolTemp design uses an ergonomic rubber-grip handle and anti-siphon protection; it does not mix hot and cold water.
Key Features
- 14-inch nominal insertion.
- 1/2-inch crimp PEX supply connection.
- Oil-rubbed bronze finish.
- Cold-water operation with anti-siphon vacuum breaker.
Common Uses
Cold-water outdoor hose access for watering and maintenance.
Technical Specifications
- Model: P-114X14-ORB
- Series: P-114 CoolTemp
- Water supply: Cold only
- Nominal insertion: 14 inches
- Inlet: 1/2-inch crimp PEX
- Finish: Oil-rubbed bronze
- Body: Brass
- Maximum pressure: 125 PSI
- Maximum temperature: 140 F
Dimensions
Nominal insertion: 14 inches
Inlet: 1/2-inch crimp PEX
Insertion length is not complete assembly overall length.
Compatibility & Installation Notes
Check wall depth and supply position so the shutoff is in a heated area. Follow the P-114 installation guide, use compatible crimp PEX fittings and allow drainage. Remove hoses during freezing weather. PRIER limits continuous pressure exposure to 12 hours for this ASSE 1019 device.
Frequently Asked Questions
Does it mix hot and cold water?
No. P-114 is the single-temperature cold-water CoolTemp hydrant; P-118 is the hot-and-cold model.
What connection and finish are supplied?
P-114X14-ORB has a 1/2-inch crimp PEX inlet and oil-rubbed bronze finish.
What does 14 inches identify?
It is the nominal insertion length. Match that reach to the wall and protected supply location.
Why Buy from Big Frog Supply?
Select P-114X14-ORB when the outdoor supply is cold-only crimp PEX and the installation needs a 14-inch reach. Its oil-rubbed bronze finish gives you a specific finish choice without confusing CoolTemp with a hot-and-cold mixing hydrant.
Reviews
There are no reviews yet.