Product Overview
The Eemax SPEX3512T LavAdvantage is a 3.5kW, 120V electric tankless water heater for compatible point-of-use handwashing applications. It is designed for low-flow lavatory fixtures where the incoming water temperature, desired outlet temperature, and fixture flow fall within the heater’s performance range.
This model is listed with 0.2 GPM minimum activation, 2.0 GPM maximum flow, 1/2 in. NPT compression water connections, and a 25 PSI to 150 PSI pressure range. It is intended for indoor installation and must be protected from freezing. Before ordering, confirm the fixture type, aerator or flow control, electrical circuit, breaker size, 10 AWG copper wiring requirement, mounting orientation, plumbing connections, and service access. The unit should be installed vertically with the plumbing connections positioned as directed in the manual. Water must be run through the heater to remove air before electrical power is switched on.
Key Features:
- 3.5kW point-of-use tankless water heater
- 120V operation
- 0.2 GPM minimum activation flow
- 1/2 in. NPT compression water connections
- Factory-set hot-water output with field adjustment noted in product data
- ABS-UL 94 5VA rated cover
- Indoor lavatory application
Common Uses:
- Single handwashing lavatories
- Office and commercial restrooms
- Point-of-use sink applications with low-flow fixtures
Technical Specifications:
- Model: SPEX3512T
- Product Type: Electric tankless water heater
- Power Rating: 3.5kW
- Voltage: 120V
- Amperage Draw: 29A
- Required Breaker: 30A single-pole
- Recommended Wire Size: 10 AWG copper
- Minimum Activation Flow: 0.2 GPM
- Maximum Flow: 2.0 GPM
- Water Connections: 1/2 in. NPT compression
- Pressure Range: 25 PSI minimum / 150 PSI maximum
- Dimensions: 10.75 in. H x 5.25 in. W x 3 in. D
Compatibility and Installation Notes:
Use for compatible low-flow lavatory applications only. Confirm circuit requirements, fixture flow, temperature rise, mounting orientation, and plumbing connections before purchase. Follow the manual and applicable requirements during installation.
FAQ
What type of fixture is this intended for?
It is intended for compatible single lavatory handwashing applications when properly sized.
What electrical circuit is required?
The stored specifications list a dedicated 120V circuit with a 30A breaker and 10 AWG copper wire.
What flow activates the heater?
The listed minimum activation flow is 0.2 GPM.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product information, helpful support, and convenient online ordering for water-heating equipment.
Reviews
There are no reviews yet.