Brand: Hunter Industries SKU: PGV-101G-S
Product Overview
The Hunter PGV-101-G-S is a 1-inch screw-top irrigation valve with slip inlet and outlet connections plus an integrated flow-control stem. The Big Frog Supply SKU is stored as PGV-101G-S. It is designed for residential and light-commercial solvent-weld PVC systems that need a 24 VAC control valve with local flow adjustment.
Hunter rates the 1-inch PGV family for approximately 0.2 to 40 GPM and a recommended pressure range of 20 to 150 PSI. The flow-control stem supports zone balancing, reduction of excessive flow, or manual shutoff during service. The valve also uses a double-beaded diaphragm, reverse-flow solenoid design, internal and external manual bleed, and a standard encapsulated 24 VAC solenoid.
Key Features
- 1-inch slip inlet and outlet connections
- Integrated flow control
- Approximate flow range of 0.2 to 40 GPM
- Recommended pressure range of 20 to 150 PSI
- Temperature rating up to 150°F
- Double-beaded diaphragm
- Reverse-flow solenoid design
- External and internal manual bleed
- Standard encapsulated 24 VAC solenoid
Common Uses
- Residential sprinkler zones
- Light-commercial irrigation systems
- Solvent-weld PVC installations requiring flow adjustment
- Replacing a matching 1-inch slip PGV valve with flow control
Compatibility and Installation Notes
- Confirm the slip sockets match the planned 1-inch PVC piping.
- Install with the body flow arrow aligned with water movement.
- Follow the pipe and cement manufacturer’s solvent-weld preparation and cure-time instructions.
- Use with a compatible 24 VAC controller unless an approved alternate solenoid is installed.
- Size the valve according to design flow, pressure loss, available pressure, and downstream demand.
- Flush the piping before installation and provide service access in the valve box.
Frequently Asked Questions
Does PGV-101G-S include flow control?
Yes. Hunter identifies PGV-101-G-S as the slip-connection model with a flow-control stem.
Are these threaded connections?
No. Both the inlet and outlet are slip sockets intended for compatible solvent-weld piping.
Can the valve be used with a battery controller?
The included solenoid is 24 VAC. Supported battery-controller systems require a compatible Hunter DC-latching solenoid.
Why Buy from Big Frog Supply?
Big Frog Supply carries Hunter PGV valves, solenoids, diaphragms, pressure regulators, controllers, and irrigation repair components.
Reviews
There are no reviews yet.