Rain Bird XACZ100PRF 1-Inch Anti-Siphon Drip Control Zone Kit

Rain Bird XACZ100PRF 1-Inch Anti-Siphon Drip Control Zone Kit

Brand: Rain Bird | SKU: XACZ100PRF

Product Overview

XACZ100PRF combines an electric anti-siphon valve with a pressure-regulating RBY filter for a medium-flow drip irrigation zone. Select it for a 3–15 GPM design where the valve can stand above the highest emitter; its atmospheric vacuum breaker makes installation elevation a critical part of choosing this kit.

Key Features

• Two-component kit combines valve control, filtration and pressure regulation.
• Nominal 40 psi regulated outlet supports compatible downstream drip equipment.
• 200-mesh filtration screens water before it reaches the drip layout.
• Above-ground anti-siphon configuration differs from a buried inline control-zone assembly.

Common Uses

• Medium-flow landscape drip zones designed for 3–15 GPM.
• Above-ground valve locations that meet the required elevation above every emission device.

Technical Specifications

• Model: XACZ100PRF; manufacturer part X10317.
• Components: 1-inch ASV anti-siphon valve and 1-inch pressure-regulating RBY filter.
• Inlet and outlet connections: nominal 1-inch NPT.
• Flow range: 3–15 GPM.
• Published inlet pressure range: 20–150 psi.
• Nominal regulated outlet: 40 psi with adequate inlet pressure at the design flow.
• Filtration: 200 mesh / 75 micron.
• Standard electric operation: 24 VAC, 50/60 Hz.

Dimensions

Rain Bird lists a 14-inch kit height. This housing dimension is separate from the installation elevation: the exact kit guide requires the anti-siphon valve to be at least 12 inches above the highest emission device. Leave additional access for the valve, filter cap and pipe connections.

Compatibility & Installation Notes

Install above ground with the anti-siphon valve upright and at least 12 inches above the highest emission device, following the exact kit installation guide and applicable backflow requirements. Place the pressure-regulating filter downstream of the valve so it is not under constant pressure. Match both 1-inch NPT connections and confirm total emitter demand stays within 3–15 GPM. The regulator reduces pressure; a 20 psi inlet cannot produce a 40 psi outlet. Rain Bird’s performance chart lists minimum inlet pressures of 43.3 psi at 3 GPM and 59.7 psi at 15 GPM to obtain 40 psi downstream. Standard operation uses a compatible 24 VAC irrigation controller; battery/DC and IVM systems require the specified solenoid conversion, and the kit is not listed for ESP-LXD two-wire control.

Frequently Asked Questions

Can this kit be buried in a valve box?

No. This anti-siphon kit requires an above-ground installation with the valve at least 12 inches above the highest emission device, following the kit guide.

What flow and filtration does XACZ100PRF provide?

It is rated for 3–15 GPM and includes a 200-mesh / 75-micron pressure-regulating RBY filter.

Does any inlet pressure from 20–150 psi produce a 40 psi outlet?

No. Adequate inlet pressure is required at the design flow. The regulator reduces pressure and cannot boost a low-pressure supply.

Why Buy from Big Frog Supply?

Choose XACZ100PRF when a 3–15 GPM zone needs both 200-mesh filtration and nominal 40 psi regulation at an above-ground anti-siphon valve. Confirming the 12-inch elevation above the highest emitter and the inlet pressure available at your design flow helps determine whether this kit suits the site before you size the downstream tubing.