Rain Bird 5004+PCSRSSNP 4-Inch Stainless Steel SAM/PRS Non-Potable Rotor
Brand: Rain Bird | SKU: 5004+PCSRSSNP
Product Overview
Choose the Rain Bird 5004+PCSRSSNP when a non-potable irrigation zone needs a 4-inch pop-up rotor with a stainless steel riser. This 5000 Plus PRS model combines individual-head flow shutoff, a SAM check valve and nominal 45 psi pressure regulation. Its purple cover identifies the non-potable water source, while the adjustable arc lets you fit coverage to lawn boundaries.
Key Features
- Stainless steel riser for applications where added resistance to vandalism is useful.
- Purple cover identifies a non-potable irrigation water source.
- PRS regulates nozzle pressure to a nominal 45 psi when adequate inlet pressure is available.
- SAM check valve holds up to 7 feet of elevation head to limit low-head drainage.
- Plus flow shutoff stops watering at this head while the rest of the zone operates.
- Adjustable 40–360° arc, including reversing full-circle operation.
Common Uses
- Non-potable irrigation zones in residential, commercial or public turf areas.
- Sloping sites needing drainage control within the 7-foot SAM limit.
- Projects specifying a stainless steel riser and pressure-regulated rotor.
Technical Specifications
- Merchant/manufacturer product ID: 5004+PCSRSSNP; Rain Bird ordering model: Y65770SSNP.
- Inlet: 3/4-inch female NPT, bottom connection.
- Riser: stainless steel; cover: purple, non-potable identification.
- Operating-pressure range: 25–65 psi; nominal PRS outlet target: 45 psi with sufficient supply pressure.
- Arc: 40–360°, reversing at full-circle setting.
- Check valve: SAM, up to 7 feet (2.1 m) of elevation head.
- Flow control: Plus individual-head flow shutoff.
- Nozzle choice determines radius and flow; use the 45 psi performance rows when the regulator is operating at its target.
- Standard-angle nozzle examples at 45 psi: No. 1.5 gives 35-foot radius at 1.54 GPM; No. 3.0 gives 39 feet at 3.09 GPM; No. 8.0 gives 44 feet at 8.03 GPM.
Dimensions
- Pop-up height: 4 inches, measured from cover to nozzle.
- Retracted body height: 7-3/8 inches.
- Exposed surface diameter: 1-5/8 inches.
Compatibility & Installation Notes
Match the 3/4-inch NPT bottom inlet to the supply fitting, flush the line and select a nozzle using pressure and zone capacity. PRS reduces pressure; it cannot raise a low-pressure supply to 45 psi.
Set the fixed left stop, then adjust the right arc with a flat-blade screwdriver. Use the Plus shutoff when setting up other heads; turn off and depressurize the supply before disassembly.
The purple cover identifies non-potable use; it does not filter water or provide backflow prevention. Follow the system design for reclaimed-water separation and backflow protection.
Product imagery illustrates the 5000 Series non-potable rotor. The specified configuration for 5004+PCSRSSNP includes the stainless steel riser.
Compare Rain Bird 5000 Series rotor options
Frequently Asked Questions
Does 5004+PCSRSSNP have a stainless steel riser?
Yes. Rain Bird identifies this exact product as a 4-inch 5000 Plus PRS rotor with stainless steel riser, SAM check valve and non-potable cover.
Does PRS guarantee 45 psi from any supply?
No. PRS reduces higher pressure to a nominal 45 psi at the nozzle. It cannot boost a supply that is too low.
What does the purple cover mean?
It identifies the rotor for a non-potable water system. The cover does not make the water safe to drink or provide backflow protection.
How much elevation can the check valve hold?
The SAM check valve holds up to 7 feet of elevation head to help limit drainage from lower heads after the zone shuts off.
Why Buy from Big Frog Supply?
Choose 5004+PCSRSSNP when the specification calls for both a stainless steel riser and a purple non-potable cover, rather than selecting a basic plastic-riser rotor. Its 45 psi PRS target helps guide nozzle selection, while the 7-foot SAM check valve and Plus shutoff address low-head drainage and individual-head setup.
Reviews
There are no reviews yet.